Outdoor ADSS Cable
- Detail
Description
ADSS cable is loose tube stranded. The 250 um fibres are positioned in a loose tube made of a high modulus plastic.
The tubes are filled with a water-resistant filling compound. The tubes and fillers are stranded around FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. It is covered with thin PE inner sheath.
After stranded layer of aramid yarns are applied over the inner sheath as strength member.
The cable is completed with PE or AT outer sheath.
Features and Benefits
- Can be installed without shutting off the power
- Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25kv
- Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
- Large span lengths and the largest span is 1000m
- Good performance of tensile strength and temperature.
- The design life span is over 30 years
- ADSS cable complies with Standard IEEE 1222-
- 2004 as well as IEC60794-1.
Application
- Outdoor Aerial.
|
Ref.Outer Diameter (mm) |
Ref.Weight (kg/km) |
Ref.Daily Max.working Tension kN |
Max. Allowable Working tension (kN) |
Break Strength(kN) |
|||
|
PE Sheath |
AT Sheath |
||||||
|
12.5 |
125 |
136 |
1.5 |
4 |
|||
|
13.0 |
|||||||
|
13.3 |
|||||||
|
13.6 |
|||||||
|
13.8 |
|||||||
|
14.5 |
|||||||
|
14.9 |
|||||||
